For manufacturers of electric motorcycles, three-wheelers and light electric vehicles targeting the European market, a practical question arises: the public charging network built for passenger vehicles is already available, but can these vehicles tap into this infrastructure for energy replenishment?
The answer is not simply “swap in a CCS2 connector”, nor is DC fast charging achievable just by installing an EVCC.
A proper technical evaluation needs to cover at least three layers: whether the connector and communication link can be established, whether the supply voltage is compatible, and whether the battery and vehicle can safely accept the charging power.
Lincoren offers a complete low‑voltage and high‑voltage platform solution dedicated to electric two‑ and three‑wheelers. Our CCS AC and DC charging solution has been deployed in mass production for overseas markets, enabling electric motorcycles to charge directly on public CCS2 charging stations in Europe and CCS1 stations in North America.
Below we explain the implementation prerequisites and key selection considerations from an engineering perspective.
1. Distinguish the three types of compatibility
Physical compatibility: The vehicle‑side connector and mounting design comply with interface requirements of the target market. Mechanical matching with CCS2 is the prerequisite for connection, yet it alone does not guarantee successful charging.
Communication compatibility: The EVCC handles communication and coordinates the charging process with the charger. It establishes a session via communication with the charger’s SECC, exchanging charging capacity, power demand and status data. DIN 70121 and ISO 15118 form the core standard protocol framework.
Electrical and safety compatibility: The charger must deliver voltage and current within the permissible input range of the electric motorcycle system. On‑board power conversion, BMS, VCU and safety protection circuits must work in coordination to complete charging.
In short, a successful protocol handshake is only the starting point. Stable, reliable charging of the full vehicle is the real objective. A single successful charging session does not equal compatibility across all charger models and firmware versions.
2. How 72 V nominal electric motorcycles connect directly to automotive DC chargers
Many electric motorcycles use 72 V or 96 V battery systems. In contrast, European public CCS2 DC chargers are generally designed for the higher‑voltage platforms of passenger cars. The rated power marked on chargers — 50 kW, 150 kW or 350 kW — does not mean the charger can output the voltage required by low‑voltage battery packs.
Lincoren’s on‑board fast‑charging module is specially developed for low‑voltage charging systems of two‑wheelers. It allows 72 V nominal electric motorcycles to connect directly to high‑power DC chargers with a 250–750 V DC output range, enabling low‑voltage electric motorcycles to use European automotive DC fast chargers.
For electric motorcycle OEMs, the value of Euro‑standard CCS2 (DC‑only or combined AC/DC charging) is not limited to replacing a connector. It delivers greater flexibility and more options for charging under different real‑world energy supply scenarios.